Enterasys Networks XSR-3020 - Manual (Page 81)

Bootrom Monitor Mode Commands
XSR Getting Started Guide 3-37
copy
This command copies a file using the syntax copy . You
can copy files from flash: to cflash: and vice versa.
da
This command shows system date/time with the sample output below:
XSR-3020:da
Date: Thursday, 29-MAY-2003.
Time: 10:14:07
df
This command shows free disk space. Sample output is shown as follows:
XSR-3020: df
Free space on flash: is 3383296 bytes (0x33a000).
del
This command removes a file from flash: or cflash: memory.
dir
This command lists the contents of the current directory in long format. The command displays
the following sample output:
XSR-3150: dir
Listing Directory flash::
-rwxrwxrwx 1 0 0 4678118 May 5 23:06 xsr3000.fls
-rwxrwxrwx 1 0 0 2228 May 29 09:57 persistent-data
-rwxrwxrwx 1 0 0 1153 May 29 09:51 startup-config
-rwxrwxrwx 1 0 0 0 May 29 09:51 private-config
2895872(0x2c3000) bytes free on flash:
ds
This command sets the system date with the syntax yyyy mm dd w (1=Sunday) . For example:
XSR-3020: ds 2003 6 1 3
dt
This command sets the system time using the syntax hh mm ss . E.g.:
XSR-3020: ds 11 59 59