Native Instruments KOMPLETE KONTROL S88 MK2 88-Key Controller for KOMPLETE - Manual (Page 223)

2. To activate Chord mode, set MODE to HARM by turning Knob 5 (by default set to OFF ).
3. Define the intervals of your chord with the TYPE parameter by turning Knob 6 (by default
set to 1-3-5 ).
4. To enable playing full chords, ensure that the SCALE ( Edit ) button is lit.
⇨ Chord mode is activated and set to Harmonizer . Pressing any key automatically activates
and plays back the nearest lit key according to the mapping by selected scale. It also
plays back the third and the fifth note above the pressed key in the selected scale, in ac-
cordance with the interval value set by Knob 6 (
1-3-5 , meaning the first, third, and fifth
note of a chord). All played back notes are indicated by the Light Guide.
5. To map the knobs and displays to Instrument parameters again, press PLUG-IN . The
Scale engine remains switched on.
15.5 Editing Scales and Chords
You have the possibility to tailor the scales and chords to your liking using the Scale engine
parameters.
► To edit the Scale engine parameters in the KOMPLETE KONTROL software, click on
SCALE in the Perform panel so it is highlighted.
► To enable Scale Edit mode and map the Scale engine parameters to the keyboard’s Con-
trol section, press
SHIFT + SCALE ( Edit ).
→ You can now edit the Scale engine parameters on the keyboard’s Control section.
Smart Play – Playing and Editing Scales and Chords
Editing Scales and Chords
KOMPLETE KONTROL S-Series - Manual - 223