Pioneer BDR-X13UBK External USB 3.2 Gen 1 Blu-Ray Drive with M-DISC Support - Manual (Page 9)

9
BDR-X13UBK En
IMPORTANT SAFETY INSTRUCTIONS
Using this function
• During operation, do not subject the device to shock or vibration, or plug in or
unplug the USB cable or AC adapter power plug.
• During operation, do not move or pick up the device. The disc rotates at high speed,
and picking up or moving the device may damage the disc. To move the device, first
remove the disc, and turn the power off.
• Do not place any objects on this device, which may damage it or cause it to become
unstable and fall over or fall off, potentially leading to injury.
• When using this device, ensure that you adhere to the displayed warnings and
cautions from your PC manufacturer.
WARNING
When using the AC adapter and power cord supplied with this device, ensure
that you observe the following.
• Do not place any objects on the power cord or AC adapter cord. Additionally, ensure
that the cords do not become trapped under the device. Protect the power cord from
being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus. Do not cover the cord with a rug or other
items.
• When there is dust or metal adhering to or close to the blades of the power plug,
pull out the plug and then wipe them off with a dry cloth. Continuing to use the
device may lead to fire or electric shock.
• Do not damage, modify, forcibly bend, twist, pull, or heat the power cord or AC
adapter cord. Doing so may lead to damage to the cord, which can result in fire or
electric shock.
• The AC adapter and power cord supplied are for use with this device only. Do not
use them with other devices. Doing so may lead to fire or electric shock.
• Do not use any AC adapter or power cord other than those supplied with this device.
Using other AC adapters or power cord may lead to fire.
• Keep the AC adapter and power cord out of reach of children. Accidentally wrapping
the AC adapter around the neck may result in suffocation.
• Do not use with voltages other than the indicated power supply voltage (120 volts
AC, 60 Hz). Doing so may lead to fire or electric shock.
• Do not connect this device to a direct current (DC) power source (such as used on a
ship). Doing so may lead to fire or electric shock.
• Do not plug in or unplug the power plug with wet hands. Doing so may lead to
electric shock.
• When unplugging the power cord, do not pull on the cord. Doing so may lead to
damage to the cord, which can result in fire or electric shock. Ensure that you hold
the plug when unplugging.