Pioneer BDR-X13UBK External USB 3.2 Gen 1 Blu-Ray Drive with M-DISC Support - Manual (Page 12)

12
BDR-X13UBK En
• Moisture can form in the operating section of the product if the drive is taken from
cool surroundings to a room with a warmer temperature. Let the drive stand for one
to two hours in the new location before turning it ON.
• Do not use in dusty locations, or in locations with high temperature or humidity.
• Do not inspect or modify the interior of the device.
• Use a soft, dry cloth when wiping off dirt from the exterior of the device and the AC
adapter. In the case of significant soiling, dilute a neutral cleaner five to six times in
water and use this to moisten a soft cloth, wipe the soiling away, then dry with a dry
cloth. Do not use volatile chemicals including benzene, thinners, alcohol, or aerosol
sprays, as these may damage the surface. Before using chemically treated cloth
intended for the care of electronics, carefully read the cautions included with the
cloths.
• When you do not intend to use the device for an extended period due to travel, etc.,
for safety, be sure to unplug the power plug from the outlet.
• There are no guarantees regarding data if data is lost while using this device. Ensure
you make regular backups of your data for recovery in the case of malfunctions.
Handling discs
• Do not touch or scratch the signal (shiny) side of the disc.
• Hold the disc either by both edges, or by the center hole
and one edge.
• Do not apply stickers or labels to the disc.
• Do not use cracked or significantly warped discs. Doing
so may lead to a malfunction in the device.
• When using old or rental discs, check that there are no
cracks around the center hole. Centrifugal force from
high-speed rotation may enlarge these cracks, causing
the disc to break.
• Do not use discs with special shapes (heart-shaped,
hexagonal, etc.) or other non-standard discs. Doing so
may lead to a malfunction.
• If there is dust or fingerprints on the disc, use a soft cloth
to wipe outwards from the center to the outer edge of
the disc. Do not wipe using a circular motion on the disc.
• Do not use record spray or antistatic agents. Doing so
may damage the disc.
To protect the disc, ensure it is kept in a disc case, and check for soiling or dust on
the recording surface before use.
Cautions in Usage