Denon DJ DJ SC6000M Prime Dual-Layer Media Player with 10.1" Multi-Touch Display - Manual (Page 17)

17
Cues/Loops
• Cue / Loop Quantization : This setting determines the degree of quantization for time-based features: hot cue points,
loops, and loop rolls. Select 1 / 8 beat, 1 / 4 beat, 1 / 2 beat, 1 beat, or 4 beats.
•
Paused Hot Cue Behavior : This setting determines how pads will play their hot cue points. When set to
Momentary , playback will start from a hot cue point when you press and hold its pad—release the pad to return to
the hot cue point. When set to Trigger , playback will start from a hot cue point (and continue) when you press and
release its pad.
• Default Loop Size : This setting determines the default size of an auto loop when you load a new track to the deck:
1 , 2 , 4 , 8 , or 16 beats.
• Smart Loops : This setting determines whether or not a manual loop will be automatically expanded or reduced to a
conventional length (e.g., 2 beats, 4 beats, 8 beats, etc.) when you set it. Select On or Off . This setting works
independently of the quantization setting.
•
Move Cue To Loop In: This setting determines whether the song's initial Cue Point will automatically be moved to
the start of a loop ( On ), or remain at its current point ( Off ).
• Saved Loop Behavior: This setting determines the action of loops after they have been saved. When set to Reloop ,
pressing a pad with a saved loop will start playing the loop again. When set to Disable , pressing a pad with a saved
loop will turn off the loop.
Display
•
Track Title: This setting determines whether tracks titles are shown as the track's Filename or its embedded
Metadata (tags).
• Time Format : This setting determines whether or not pitch adjustment affects how the track time is displayed. When
set to Static , the track’s time corresponds to locations in the track as usual; adjusting the pitch does not affect it.
When set to Dynamic , the track’s time will automatically adjust to account for changes in pitch. For instance, if you
set the pitch fader to -8% , the track time will increase so it is 8% longer.
• Track End Warning : This setting determines how long before the end of a track SC6000M PRIME will warn you that
it is nearing the end. If the track is on the currently selected layer, the platter ring and track overview will flash. If
the track is on the opposite layer, the Layer button will flash.
• On Air Mode: This setting changes the platter ring illumination when the channel fader on the Denon DJ mixer is up
or down, indicating an active or "on air" deck. When this setting is On , raising the channel fader will change the
platter color from white to the selected color. When this setting is Off , the user-selected color will always be shown
regardless of the channel fader position.
Note: This requires a connection to a compatible Denon DJ mixer via Ethernet.
Safety
• Lock Playing Deck : This setting determines whether or not you will be able to load a track to the deck as it is
playing. Select On or Off . When this setting is on, the deck must be paused in order to load a track to it.
•
Needle Lock : This setting determines whether or not you can tap the track overview in the display to jump to that
location in the track during playback. Select On or Off . You can use the track overview while playback is stopped
regardless of this setting. Alternatively, if Needle Lock is On and Motor is On , stopping the platter with your hand or
palm will allow you to swipe through the track overview.
• Pad Lock : This setting determines whether the pads and pad mode buttons ( Hot Cue , Loop , Roll , Slicer ) are
enabled or disabled. Select On or Off .
Library
• Key Notation : This setting determines how the track key is notated in the display. You can view the key as all
Sharps , all Flats , Open Key , or Camelot .
•
Key Filter : This setting determines whether the Key filter shows tracks with the same key only ( Match ) or tracks with
compatible keys ( Compatible ).
• BPM Range : This setting determines the lowest- and highest-possible BPM values that will be used when tracks are
analyzed: 58 – 115 , 68 – 135 , 78 – 155 , 88 – 175 or 98 – 195 BPM.
• BPM Filter Tolerance : This setting determines the “tolerance” of the BPM filter so you can include tracks with
tempos that are within a small range of the selected tempo. Select +0 , 1 , 2 , 3 , 5 , 10 , or 15 .
•
Collection Browse Behavior : This setting determines browsing behavior when using the Library. When set to Select ,
tapping a playlist or folder will select it, and a double-tap is required to open it. When set to Open , tapping a playlist
or folder will open it.
• Demo Content: Use this option to enable or disable the pre-installed demo content.