beautypg.com

Control center, User profile, Operation > control center – Denon DJ DJ SC6000M Prime Dual-Layer Media Player with 10.1" Multi-Touch Display User Manual

Page 16: Ttings. see, Operation, Configuration

background image

16

Slicer Mode

In Slicer Mode (first press), the eight pads represent eight sequential beats—“slices”—in the beatgrid. The currently
playing slice is represented by the currently lit pad; the light will “move through the pads” as it progresses through the
eight-slice phrase. You can press a pad to play that slice. When you release the pad, the track will resume normal
playback from where it would have been if you had never pressed it (i.e., as if the track had been playing forward the
whole time).

To play a slice

, press the corresponding pad.


Use the

parameter buttons

to change the length of the repeats.


In Slicer Loop Mode (second press), the eight pads represent eight sequential beats—“slices”—in the beatgrid. The
currently playing slice is represented by the currently lit pad; the light will “move through the pads” as it progresses
through the eight-slice phrase, which will loop (this is the difference between this mode and Slicer Mode). You can press
a pad to play that slice. When you release the pad, the track will resume normal playback from where it would have been
in the loop if you had never pressed it (i.e., as if the track had been playing forward the whole time).

Control Center

Press the Shortcuts button

or

swipe down from the toolbar

to open the Control Center. Here, you can quickly adjust

the Quantize and Continue settings by tapping the icons in the center of the screen. You can also access the following
menus. Click the links below to jump to that part of the guide:

User Profile

– This menu is used to edit your performance preferences.

Settings

– This menu is used to edit the settings of the PRIME hardware.

Source

– This menu is used for selecting your source media device.

Wi-Fi

– This menu is used for connecting to and configuring your Wi-Fi network.

Engine Lighting

– This menu is used for working with the SoundSwitch Engine Lighting integration.

User Profile

To open the

User Profile menu

, press and hold

View

.

To close the User Profile menu

, press

View

again.


In the

User Profile

menu, swipe up or down to scroll through the options, and tap an option to select it:

Playback

Motorized Platter Start:

This setting will determine how quickly your track starts to play. When set to

Normal

, the

track will play in relation to the motor start-up speed. When set to

Instant

, the song will begin playing immediately,

and the motor and platter will catch up to the song within a few milliseconds.

Track Start Position

: This setting determines where the beginning of a track is after it loads. Select the actual start

of the file (

Track Start

) or the automatically detected beginning of an audio signal (

Cue Position

).

Default Speed Range

: This setting determines the range of the

pitch fader

. Select

+4%

,

8%

,

10%

,

20%

, or

50%

.

Sync Mode

: This setting determines the degree of synchronization applied when you press the Sync button on

SC6000M PRIME:

o

Bar

: The tempo will be synced, and the track will be automatically bar-matched with the track on the lead unit

(the downbeats of each bar will be aligned).

o

Beat

: The tempo will be synced, and the track will be automatically beat-matched with the track on the lead unit.

o

Tempo

: Only the tempo will be synced (the BPM will match that of the lead deck).

Sync Button Action:

This setting determines how the

Sync

button will act when pressed.

o

Toggle:

This mode allows you to toggle sync on and off without having to hold

Shift

.

o

Shift Disable:

This mode requires

Shift

to be held in order to turn off sync.

Pitch Control Type:

This setting determines the primary function of the Pitch Bend buttons. Select

Pitch Bend

to

keep the primary function as momentarily reducing or increasing the pitch, or select

Range

to set the primary

function to adjusting the range of the pitch fader. The function not used as the primary will still be available by
holding

Shift

and using the

Pitch Bend

buttons.

Slice

1

Slice

2

Slice

3

Slice

4

Slice

5

Slice

6

Slice

7

Slice

8