Elinchrom Plug-In Flashtube Pro 400 for Quadra Pro and Quadra S Heads - Manual (Page 9)

8
User Manual
EN
ERROR MANAGEMENT
ERROR
NUMBER
DESCRIPTION SOLUTION
1
2
3
4
11
15
60
61
Wait until the unit has cooled down.
The unit will switch back to the
normal operation as soon as the
temperature decreases to a normal
working level.
Switch the unit off, wait 2 minutes
and switch the unit on again. If the
error shows up again the battery
requires a check up at an authorized
Elinchrom service centre.
Switch the unit off, wait 2 minutes
and switch the unit on again. If the
error shows up again the unit
requires a check up at an authorized
Elinchrom service centre.
The unit has detected a mains
supply fault. Please check the
mains/battery supply. It could be
not working correctly.
Capacitor over voltage
System over heat
Discharge timeout error
Charge timeout error
Battery low
Temperature sensor error
Communication bus error
Battery unseal error
90 Safety stop system (generic error)