Philips NeoPix Easy 2+ HD LCD Projector - Manual (Page 6)

Overview 5
Power supply
Use only a power adapter which is certified for
this product ( see Technical data, page 17 ).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
The power outlet shall be installed near the
product and shall be easily accessible.
CAUTION!
Always use the button to turn the
projector off.
Turn off the product and unplug from the
power outlet before cleaning the surface
( see Cleaning, page 15 ). Use a soft, lint-
free cloth. Never use liquid, gaseous or easily
flammable cleaners (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach
the interior of the product.
DANGER!
Risk of eye irritation!
This product is equipped with a high
power LED (Light Emitting Diode),
which emits very bright light. Do not
look directly into the projector lens
during operation. This could cause eye
irritation or damage.
2 Overview
Top view
Neo Pix
Easy 2 +
g d f e c b
a
a Focus adjustment knob
Adjust image sharpness.
b
• Switch the projector on or to standby.
• When the projector is switched on, the
LED turns green. When the projector is
in standby, the LED turns red.
c
Return to a previous menu screen.
d
Confirm a selection or entry.
e
Navigation buttons
• Navigate menu options.
• Press / to change a selection.
f
Access the settings menu.
g
• Access the home menu.
• Access input source list.