Cleaning the projector mirror – BenQ MW855UST+ 3500-Lumen WXGA Ultra-Short Throw DLP Projector User Manual
Page 67
Maintenance
67
Resetting the lamp timer
11. After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp Settings
menu. Press
MODE/ENTER
.
The
Lamp Settings
page displays. Highlight
Reset lamp timer
. A warning
message displays asking if you want to reset the lamp timer. Highlight
Reset
and
press
MODE/ENTER
. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
Cleaning the projector mirror
Remove dust with a “Bellows/Lens Blower” readily available from Camera shops to prevent
scratching the mirror when subsequently wiped.
•
Always turn the projector off and allow to cool for at least 30 minutesprior to cleaning.
•
Never touch the projector mirror or Lens directly by hand.
- MP513 (59 pages)
- MP721/721c (2 pages)
- W10000/W9000 (36 pages)
- SP920 (56 pages)
- PB8230 (38 pages)
- PB2250 (44 pages)
- PB2140 (46 pages)
- PB2220 (34 pages)
- PB6240 (46 pages)
- DX/S660 (33 pages)
- PB8250 (53 pages)
- MP610 (55 pages)
- W100 (47 pages)
- MP770 (1 page)
- DLP PROJECTOR PE8700 (97 pages)
- MP515 (68 pages)
- CP120C (56 pages)
- CP220 (55 pages)
- PB8260 (53 pages)
- W5000 (53 pages)
- MP511 (60 pages)
- PE6800 (33 pages)
- PB6100 (122 pages)
- PB6210 (48 pages)
- PB8240 (56 pages)
- MP723 (66 pages)
- PB7230 (44 pages)
- PB2140/PB2240 (44 pages)
- DIGITAL PROJECTOR MX711 (2 pages)
- PE8720 (36 pages)
- MP512 ST (62 pages)
- MP720 (1 page)
- MP620 (61 pages)
- CP120 (66 pages)
- PB6110 (47 pages)
- Digital Projector MX613ST (68 pages)
- PE8700 (27 pages)
- PB8220 (34 pages)
- MP623 (62 pages)
- PE5120 (35 pages)
- MP730 (68 pages)
- W500 (54 pages)
- MP611 (60 pages)
- PB7200 (38 pages)
- PB2120 (34 pages)