BenQ MW855UST+ 3500-Lumen WXGA Ultra-Short Throw DLP Projector - Manual (Page 12)

Introduction 12
Remote Control
1. ON / OFF
Toggles the projector between standby
mode and on.
2. Source selection buttons
Selects an input source for display.
3. Keystone/Arrow keys ( / ▲ Up,
/ ▼ Down)
Manually corrects distorted images
resulting from an angled projection.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5. ◄ Left/
Decreases the projector volume.
6. ECO BLANK
Used to hide the screen picture.
7. LASER (No t available in Japan)
Emits visible laser pointer light for
presentation purposes.
8. MHL control buttons
(No
t available in Japan )
Goes to the previous file/Plays/Pauses/
Goes to the next file/Rewinds/Stops/
Fastforwards during media
playback. Only
available when controlling your smart
device in MHL
9. ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size.
10. ASPECT
Selects the display aspect ratio.
11. FREEZE
Freezes the projected image.
12. NETWORK SETTING
Displays the Network Settings OSD
menu.
13. Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be
pressed when asked to enter password.
14. NETWORK
Selects Network Display as the input
signal source.
15. AUTO
Automatically determines the best
picture timings for the displayed image.
When there is no OSD menu and at
MHL source, long press for 3 seconds to
switch between MHL mode and DLP
mode on remote control for MHL keys.
5
6
12
17
18
20
23
14
1
2
3
4
7
15
11
22
16
10
19
21
3
13
8
9