beautypg.com

Timing of replacing the lamp, Status message – BenQ MW855UST+ 3500-Lumen WXGA Ultra-Short Throw DLP Projector User Manual

Page 64

background image

Maintenance

64

Timing of replacing the lamp

When the

Lamp indicator

lights up red or a message appears suggesting it is time to

replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a

malfunction in the projector and in some instances the lamp may explode.
Go to

http://www.benq.com

for a replacement lamp.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too

hot. Turn the projector off and let the projector cool for 45 minutes. If the lamp or Temp

indicator still lights up after turning the power back on, please contact your dealer. See

"Indicators" on page 68

for details.

The following lamp warning displays will remind you to change the lamp.

The warning messages below are for reference only. Please follow the actual on-screen

instructions to prepare and replace the lamp.

Status

Message

Install a new lamp for optimal performance. If the

projector is normally run with

Economic

selected (See

"Setting Lamp mode as Economic or

SmartEco" on page 62

), you may continue to

operate the projector until the next lamp warning

appears.

Press

MODE/ENTER

to dismiss the message.

It is strongly recommended that you replace the

lamp at this age. The lamp is a consumable item.

The lamp brightness diminishes with use. This is

normal lamp behavior. You can replace the lamp

whenever you notice that the brightness level has

significantly diminished.

Press

MODE/ENTER

to dismiss the message.

The lamp MUST be replaced before the projector

will operate normally.

Press

MODE/ENTER

to dismiss the message.

Order a new lamp at www.benq.com

OK

Order Replacement Lamp

Equivalent lamp hour > XXXX Hours

Notice

OK

Notice

Replace Lamp soon

Equivalent lamp hour > XXXX Hours

Order a new lamp at www.benq.com

OK

Notice

Replace Lamp Now

Equivalent lamp hour > XXXX Hours
Lamp usage time exceeded

Order a new lamp at www.benq.com

OK

Notice

Out of Lamp Usage Time

Replace lamp (Refer to user manual)
Then reset lamp timer

Order a new lamp at www.benq.com