BenQ MW855UST+ 3500-Lumen WXGA Ultra-Short Throw DLP Projector - Manual (Page 34)

Operation 34
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector’s
HDMI input and the projected picture displays wrong colors, please change the color
space.
To do this:
1. Press MENU/EXIT and then press ◄ / ► until the SOURCE menu is highlighted.
2. Press ▼ to highlight Color Space Conversion and press ◄ / ► to select the
setting.
This function is only available when the HDMI input socket is in use.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the remote control
1.
Press Digital Zoom+/- to display the Zoom bar. Press Digital Zoom+ to magnify
the center of the picture. Press the key repeatedly until the picture size is suitable for
your need.
2. Use the directional arrows ( ▲ / ▼ / ◄ / ► ) on the projector or remote control to
navigate the picture.
3. To restore the picture to its original size, press AUTO . You can also press Digital
Zoom- . When the key is pressed again, the picture is further reduced until it is
restored to the original size.
• Using the OSD menu
1.
Press MENU/EXIT and then press ◄ / ► until the Display menu is highlighted.
2. Press ▼ to highlight Digital Zoom and press MODE/ENTER . The Zoom bar
displays.
3. Press ▼ on the projector repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press MODE/ENTER to switch to the paning mode and
press the directional arrows ( ▲ / ▼ / ◄ / ► ) to navigate the picture.
5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/
out functionality, and press AUTO to restore the picture to its original size. You can
also press ▼ repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.