BenQ MW855UST+ 3500-Lumen WXGA Ultra-Short Throw DLP Projector - Manual (Page 37)

Operation 37
Optimizing the image
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall
which may not be white, the Wall Color feature can help correct the projected picture’s
color to prevent possible color difference between the source and projected pictures.
To use this function, go to the Display > Wall Color menu and press ◄ / ► to select a
color which is the closest to the color of the projection surface. There are several
precalibrated colors to choose from: Light Yellow , Pink , Light Green , Blue , and
Blackboard .
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one
to suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following
steps.
• Press MODE/ENTER on the projector repeatedly until your desired mode is
selected.
• Go to the Picture > Picture Mode menu and press ◄ / ► to select a desired mode.
1. Bright mode : Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2. Presentation mode : Is designed for presentation. The brightness is emphasized in
this mode to match PC and notebook coloring..
3. sRGB mode : Maximizes the purity of RGB colors to provide true-to-life images
regardless of brightness setting. It is most suitable for viewing photos taken with an
sRGB compatible and properly calibrated camera, and for viewing PC graphic and
drawing applications such as AutoCAD.
4. Cinema mode : Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (dimly lit)
environment.
5. 3D mode : Is appropriate for playing 3D images and 3D video clips.
6. User 1/User 2 mode : Recalls the settings customized based on the current
available picture modes. See "Setting the User 1/User 2 mode" on page 38 for details.