BenQ MW855UST+ 3500-Lumen WXGA Ultra-Short Throw DLP Projector - Manual (Page 53)

Operation 53
Description of each menu
FUNCTION DESCRIPTION
1. Display men
u
Wall color
Corrects the projected picture’s color when the projection surface
is not white. See "Using Wall Color" on page 37 for details.
Aspect Ratio
There are several options to set the image's aspect ratio depending
on your input signal source. See "Selecting the aspect ratio" on page
35 for details.
2D Keystone
Adjusts the shape of the projected image to ensure straight lines on
all four corners. See "Correcting 2D Keystone" on page 27 for
details.
Corner Fit
Adjusts the shape of the projected image to ensure a specific corner
is straight. See "Correcting Corner Fit" on page 29 for details.
Position
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower
position of the page change with every key press you made until they
reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC signal
(analog RGB) is selected.
H.size
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Digital zoom
Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 34 for details.