Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 22)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 22 / 61
Generally, the camera audio can be set as one input if just using one MIC.
3.5mm Headphone Jack
To use a 3.5mm headphone for audio checking, the channel can be selected to CH1/2 or CH3/4：Press and
hold the [Audio] button for one sec, set
[AUDIO button  Headphone Source  CH1/2]
CAUTION When using microphones that don't need Phantom power, please turn off the Phantom 48V.
NOTICE The audio will be packed into mov file only when the project FPS is the same as CMOS imaging
sensor FPS, or it will be recorded into a separate wav file. For example, if the project FPS is
25.000, when the CMOS imaging sensor FPS is set to 30.000, it will show yellow 30.000 on the UI
in the beginning, which indicates the audio is recorded into a separate WAV file.
2.7 e-ND
MAVO Edge 8K incorporates with internal full-spectrum e-ND which is
quite different from previous cameras.
E-ND is based on modern liquid crystal materials and optics controlled
electronically, which is completely unlike conventional technology such as
a rotating filter wheel or polarizing ND Filters. It covers a wide range from
0.6 to 2.4 (2 stops to 8 stops), and brings sharp images with color fidelity.
Seamless adjustment brings a very important feature: accurate exposure
stop, which is what traditional glass ND filters don't have. You can also set
the accuracy to one stop (0.3) for each rotation, but the default setting is
seamless adjustment by 0.1 stop (0.03).
The ND function is convenient to use:
 Switch internal ND : press and hold the [ND] button for one sec;
 Set the ND value when the ND is on: press the [ND] button and rotate the wheel,to set the ND value
from 0.6 to 2.4 (2 stops to 8 stops).
 When the camera is mounted with cinema/manual lenses, using the wheel to set the ND value
(default is Wheel Control: Iris value)
[MENU  Setting  Wheel Control: e-ND]
In such way, the ND value can be set directly without pressing the [ND] button.
Menu Operation
Set e-ND
[MENU 
Settings  ND: 0.03/0.3]