Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 10)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 10 / 61
1.4 Default Settings
The list below features the default settings of MAVO Edge 8K:
Type Name Default Value Type Name Default Value
SHOOTING
Default Codec ProRes 422HQ
SETTINGS
Active Mount Enhanced
Project FPS 25fps Wheel Control EF Iris
Project Blanking None Fan Speed 40%
Image Format FF Fan Control Slow While Recording
Rec Resolution 4K DCI (4096x2160) TimeCode Free Run
Sensitivity Mode ISO Mode ND tuning 0.03
ISO Highlight Stops 5.0 Main Screen Brief
Sensor FPS 25fps SSD File System HFS
Shutter Mode:
Angle
1/50s Power Threshold (V) 12V
ISO/EI ISO 800
Low Voltage
Shutdown
On
Color Temperature 5600K
NETWORK
WIFI Off
ND Clear Stream Off
LUT KC_NEUTM Bit Rate Regular
LIVE VIEW
Waveform Based LUT
SYNC
Tally Lamp On
Waveform Size Short Beeper On
Zebra Pattern None Recording Beeper On
Zoom Ratio 100%: On
SDI
OSD On
Anamorphic Ratio None LUT KC_NEUTM
Monitoring FPS 60
AUDIO
CH1/CH2 Level (48V) 30dB
Shutter Mode Time CH3/CH4 Level (48V) 30dB
Color Temp List Simple Headphone Volume 0dB
SSD Remaining Time Headphone Source CH1/2
Digital Horizon On CH1 Phantom 48V On
PLAYBACK
Playback at ×1 CH2 Phantom 48V On
Clip End Loop CH1/2 Record CH1/2
SYSTEM Language English CH3/4 Source Built-in MIC
Restore to factory settings by:
[Menu  System  Factory Reset]
NOTICE When the camera is powered with a USB storage device plugged in, it will automatically revert
to factory settings while booting up.
NOTICE Before perform factory reset, user settings can be exported from the camera. After the reset
is done, user settings can be imported to the camera.
[MENU  System  Export/Import User Settings]