Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 14)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 14 / 61
2.3 Lens
Based on active locking mount as EF Mounting Adapter II, the whole-new EF 3 Mounting Adapter is
designed in accordance with the traditional DSLR lens rotation method and has been much improved.
Compared to the previous version, EF 3 Mounting Adapter not only possesses the traditional way to rotate
the lens clockwise, but also keeps active locking to fasten the lens, thus the EF lens can be installed quickly
and locked clockwise as the PL lens, which is suitable for the utilization of Follow Focus when shooting.
Steps of attaching EF lens to new EF 3 mount:
1. Unlock: Rotate the locking ring of the EF 3 mount counterclockwise till stop; (Take off all the caps or
covers from the camera and the lens mount);
2. Install EF lens: Align the red dot on the lens, the white line on the locking ring and the dot on the
mount. And make sure that the pin on the mount matches the hole of the lens; rotate the EF lens
clockwise till the release button up;
3. Lock: Rotate the locking ring of the EF 3 mount clockwise as the arrow direction until fastened firmly.
Steps of detaching EF lens from new EF 3 mount:
1. Unlock: Rotate the locking ring of the EF 3 mount counterclockwise till stop;
2. Detach EF lens: Fully press the release button on the right side of the EF 3 mount and rotate the EF
lens counter-clockwise.
Steps to attach EF lenses by EF II adapter:
1. Release : Rotate the locking ring of the EF mount clockwise, take off the cover and the lens cover;
2. Install : Align the "red dot" on the lens with the "red dot" on the mounting adapter. Make sure that
the pin on the mount engages with the hole in the mount of the lens. For the EF-S lens, align the
white square on the lens with the one on the mount.
3. Lock : Rotate the locking ring (NOT the lens) counterclockwise (Follow the arrow of "lock sign" on the
mount) until it is fastened firmly.
CAUTION The mounting adapter might be burned if a lens/adapter with all-metal rear end is attached
directly to the camera body. In this case, please keep electronic iris control off:
[MENU  Settings  Active Mount  Disable].