Kinefinity MAVO Edge 8K Digital Cinema Camera - Manual (Page 15)

MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 15 / 61
2.4 Monitoring
Please use a recommended EVF or field Monitor with Video port, 3G-SDI (Not HD-SDI) ports, and connect
the input port of EVF or monitor to the output port of the camera body with a high quality cable.
 KineMON-5U Ultra-Bright Monitor: With the Kine Video Cord, our monitor gets both power supply
and video signal through the same cable. It is easy to mount it on the camera body firmly by using
appropriate accessories for different needs.
 KineMON-7U Ultra-Bright Monitor: Use the same Kine Video Cord as KineMON-5U to get both
power supply and video signal.
 KineEVF Full-HD OLED Viewfinder: Also use the Kine Video Cord for power supply and video signal,
and could be mounted on the camera with the tailored KineEVF Bracket.
 SDI monitor: With 3G-SDI ports, monitoring by the director monitor or the DIT monitor.
With the KineMON-5U and KineMON-7U, the latency is lower than 100ms; with KineEVF, the latency is lower
than 80ms.
CAUTION Connect the monitors to the camera by a SDI cable (75Ω) before they are turned on, and
please also pay attention to the direction of the D-Tap cord.