beautypg.com

HP L7016t 15.6" Retail Multi-Touch TN Monitor User Manual

Page 16

background image

Power cable - Connect the barrel end of the power cable to the power connector on the rear of the

monitor and connect the powered USB end of the cable to a 12 V powered USB port on the retail system

computer.

Connecting a touch monitor to a retail system computer without a 12 V powered USB option

If you are using a touch monitor as a stand-alone display connected to a retail system computer or HP

desktop computer that does not have a 12 V powered USB port, connect the following cables.

DisplayPort cable - Connect one end of the DisplayPort signal cable to the DisplayPort connector on the

rear of the monitor and the other end to the DisplayPort connector on the retail system computer.

USB B-A cable - Connect the Type-B end of the USB 2.0 cable to the USB Type-B port on the monitor and

connect the Type-A end of the cable to a USB 2.0 Type-A port on the retail system computer.

10

Chapter 1 Getting started