Turning off the projector – Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 94
94
4
Lets you select the following common projector settings (these settings may vary depending
on other selected settings):
•
Color Mode
•
Brightness Level
•
Volume
•
Geometry Correction
(
H/V-Keystone
and
Quick Corner
are available)
•
Aspect
Note:
The
Geometry Correction
setting is only displayed when
Fixed Installation
is set to
Off
and
Geometry Correction
is set to
H/V-Keystone
or
Quick Corner
in the projector's
Installation
menu.
5
Moves to the previous or next page if there are more available input sources
6
Displays the projector name and the projector keyword
7
Displays the current time
Note:
The Home screen closes after 10 minutes of inactivity.
Parent topic:
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note:
Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1.
Press the power button on the projector or the remote control.