Adjusting color uniformity – Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 156
156
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Multi-Projection menu of
each projector. (The color tone may not be uniform even after performing color uniformity.)
Note:
Set the
Color Mode
setting in each projector's Image menu to
Multi-Projection
before you start
projecting.
1.
Press the
Menu
button on the remote or control panel, select the
Multi-Projection
menu, and press
Enter
.
2.
Select the
Color Uniformity
setting and press
Enter
.
3.
Select
On
as the
Color Uniformity
setting and press
Enter
, then press
Esc
.
4.
Select
Adjustment Level
and press
Enter
.
5.
Select an adjustment level and press
Esc
.
6.
Select
Start Adjustments
and press
Enter
.
This manual is related to the following products: