Setting up crestron connected – Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual

Page 78

Text mode
Original mode

Setting Up Crestron Connected

To set up your projector for monitoring and control using a Crestron Connected system, make sure your
computer and projector are connected to the network.

Note:

If you want to use the Crestron Connected system when the projector is turned off, you need to

adjust the

Standby Mode

setting in the Operation menu. The

Standby Mode

setting is displayed only if

the

A/V Output

setting in the Signal I/O menu is set to

While Projecting

Press the

Menu

button.

Select the

Network

menu and press

Enter

Select

Network Settings

and press

Enter

This manual is related to the following products:

PowerLite L210SW 4000-Lumen WXGA Short-Throw Laser 3LCD Projector