Solutions to microphone problems – Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual

Page 256

256

• Try disconnecting and reconnecting the audio cable.

• Check the audio cable connections between the projector and your video source.

• If you do not hear sound from an HDMI source, set the connected device to PCM output.

• Make sure any connected audio cables are labeled "No Resistance."

• If you are using the USB Display function, turn on the

Output audio from the projector

setting in the

Epson USB Display Settings program on your computer.

• If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac

supports audio through the HDMI port. If not, you need to connect an audio cable.

• If you want to use a connected audio source when the projector isn't projecting any images, set the

Quick Startup

option in the Operation menu to

Off

and make sure the

A/V Output

setting in the

Signal I/O menu is set to

Always On

• Make sure the

Audio Out Device

option is set to the correct audio port for your video device.

• If you turn the projector on immediately after turning it off, the cooling fans may run at high speed

momentarily and cause an unexpected noise. This is normal.

Parent topic:

Solving Image or Sound Problems

Related references

Input Signal Settings - Signal I/O Menu

Solutions to Microphone Problems

If there is no sound when you use a microphone connected to the projector, try the following solutions:

• Make sure the microphone is securely connected to the projector.

• Adjust the

Mic Input Level

setting in the Signal I/O menu. If the setting is too high, the sound of the

other connected devices will be too low.

Parent topic:

Solving Image or Sound Problems

This manual is related to the following products: