Using wps to connect to a network, Viewing the network status – Epson PictureMate PM-400 Personal Photo Lab User Manual
Page 33
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1.
On the product, press the
home button, if necessary.
2.
Press the arrow buttons to select
Wi-Fi Setup
and press the
OK
button.
3.
Press the
OK
button to select
Wi-Fi (Recommended)
.
4.
Press the
OK
button again to proceed.
5.
Select
Push Button Setup (WPS)
and press the
OK
button.
6.
Follow the instructions on the LCD screen to complete WPS setup.
Your product should now display a WiFi symbol on the LCD screen. If it does not, repeat these steps
to try again.
Parent topic:
Viewing the Network Status
You can view the product's network status to help you determine the causes of any problems you may
have using your product on a network.
1.
Press the
home button, if necessary.
2.
Press the arrow buttons to select
Setup
and press the
OK
button.
3.
Select
Network Settings
and press the
OK
button.
33