Cleaning the print head using a computer utility – Epson PictureMate PM-400 Personal Photo Lab User Manual

Page 111

Select

Head Cleaning

and press the

button.

Press the

start button to clean the print head. You see a print head cleaning message on the LCD

screen during the cleaning cycle.

Caution:

Never turn off the product during a cleaning cycle or you may damage it.

When the cleaning cycle is finished, you see a completion message on the display screen.

Select

Nozzle Check

and press the

button.

Press the

start button to run a nozzle check and confirm that the print head is clean.

If you don’t see any improvement after cleaning the print head up to 2 times, turn the product off and wait
at least 6 hours. Then check the print head nozzles and try cleaning the print head again, if necessary. If
quality still does not improve, contact Epson.

Parent topic:

Print Head Cleaning

Cleaning the Print Head Using a Computer Utility

You can clean the print head using a utility on your Windows or Mac computer.

111