Epson PictureMate PM-400 Personal Photo Lab User Manual

Page 127

• Make sure to place your product within contact range of your 2.4 GHz router or access point. Avoid

placing your product near a microwave oven, 2.4 GHz cordless phone, or large metal object, such as a
filing cabinet.

Note:

If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and

5 GHz) mode. See your router documentation for instructions.

• Verify that your router or access point is operating correctly by connecting to it from your computer or

another device.

• You may need to disable the firewall and any anti-virus software on your wireless router or access

point.

• Check to see if access restrictions, such as MAC address filtering, are set on the router or access

point. If access restrictions are set, add your product's MAC address to your router's address list. To
obtain your product's MAC address, check the network status on the LCD screen. Then follow the
instructions in your router or access point documentation to add the address to the list.

• If your router or access point does not broadcast its network name (SSID), follow the instructions that

came with your product to enter your wireless network name manually.

• If your router or access point has security enabled, determine the kind of security it is using and any

required password or passphrase for connection. Then make sure to enter the exact WEP key or WPA
passphrase correctly.

• Check if your computer is restricting the available wireless channels. If so, verify that your wireless

access point is using one of the usable channels and change to a usable channel, if necessary.

• If you are using a Wi-Fi Direct connection that suddenly disconnects, the Wi-Fi direct password on

your device may have been changed. If necessary, delete the existing

DIRECT-xxxxxxxx

connection

settings from your device and enter a new password. See your device documentation for instructions.

• If you connected your product to a Windows computer using Wi-Fi Direct and it automatically selected

Access Point Mode, you may have trouble accessing a low-priority Internet connection. Check the
network connection or adapter settings in the Windows Control Panel and set the

Internet metric

setting to

100

for your version of the Internet Protocol.

Parent topic:

Solving Network Problems

Related topics

Wi-Fi Networking

127