Epson DS-32000 Large-Format Document Scanner User Manual

Page 65

Do not feed valuable photos, artwork, or important documents into the scanner directly. Misfeeding may
wrinkle or damage the original. When scanning these types of originals, use a carrier sheet (not
included).

Caution:

Be careful when loading the following types of originals, or they may be damaged or may not

scan successfully:

• Originals with uneven surfaces, such as embossed documents

• Curled or wrinkled originals

• Perforated originals

• Originals with labels or stickers

• Carbon-less paper

• Ripped, curled, or wrinkled originals

• Coated paper

Warning:

Carbon-less paper contains chemical substances that may damage the rollers inside the

scanner. Make sure you clean the pickup roller and the separation rollers regularly. Scanning carbon-
less paper may reduce the service life of the rollers compared with scanning plain paper.

Note:

When attempting to scan these types of originals, note the following:

• Slow down the feeding speed when scanning wrinkled originals, and smooth out the wrinkles if

possible

• Use the optional carrier sheet to scan originals that are delicate or wrinkled

• If originals are incorrectly detected as double feeds, set the

DFDS Function

on the control

panel, or select

Off

as the

Detect Double Feed

setting in Epson Scan 2

• Labels or stickers must be firmly adhered to the scanned original with no exposed glue

• Try to flatten curled originals as much as possible

Parent topic:

Loading Originals in the Input Tray

Loading Plastic and Laminated Cards in the Input Tray

You can load plastic and laminated cards that meet the card specifications in the input tray.

Note:

To increase the accuracy of auto size detection when scanning laminated cards, select the

Document Size

Settings

Scan laminated card

setting in Epson Scan 2.