Resetting the scanner roller counter – Epson DS-32000 Large-Format Document Scanner User Manual
Page 141
141
13. Close the separation roller cover until you hear it click into place.
Note:
If you are not able to close the cover, the roller is not installed correctly. Remove the roller and
reinstall it, then try to close the cover again.
14. Close the scanner cover.
15. Connect any disconnected cables.
16. Plug in the AC adapter and turn on the scanner.
17. Reset the roller counter.
Resetting the Scanner Roller Counter
Parent topic:
Cleaning and Transporting Your Scanner
Related tasks
Changing the Scanner Position (DS-32000)
Resetting the Scanner Roller Counter
When you replace the scanner rollers or perform regular cleaning, reset the scanner roller counter so
you know when you may need to perform maintenance again.
1.
Press the
home button, if necessary, and select
Scanner Maintenance
.
2.
Select a maintenance task:
• If you replaced the pickup rollers, select
Pickup Roller Replacement
.
• If you replaced the separation rollers, select
Separation Roller Replacement
.
• If you cleaned the interior of the scanner, select
Regular Cleaning
.
3.
Select
Reset the Number of Scans
.
Note:
If the administrator has set an administrator password and locked the settings, you will need to
enter the password.
4.
Select
Yes
to reset the roller counter.
Parent topic: