Sony AG-R2 Attachment Grip User Manual
Page 54
Rotate the gimbal tilt frame (
) to aim the camera lens upward.
1.
Loosen the levers (
) on both sides and slide the tilt frame (
) back and forth to adjust the balance.
Adjust so that the left and right adjusters are at the same level.
2.
After adjusting the balance, firmly tighten the levers (
) on both sides.
3.
Rotate the tilt frame (
) by about ±45° to check if the balance is adjusted properly.
If properly adjusted, the tilt frame (
) will stay still.
4.
Adjust the balance of the roll axis.
2
Loosen the lever (
) and slide the roll frame (
) left and right to adjust the balance.
1.
After adjusting the balance, firmly tighten the lever (
).
2.
Rotate the roll frame (
) by about ±45° to check if the balance is adjusted properly.
If properly adjusted, the roll frame (
) will stay still.
3.
Adjust the balance of the pan axis.
3
Loosen the lever (
) and slide the pan frame (
) back and forth to adjust the balance.
1.
After adjusting the balance, firmly tighten the lever (
).
2.
With the gimbal stationary, tilt the aircraft forward, backward, left, and right to check if the balance is adjusted
properly.
If properly adjusted, the pan frame (
) will stay still.
3.
54