Sony AG-R2 Attachment Grip - Manual (Page 25)

Related Topic
Mounting the gimbal on the aircraft
Mounting a camera on the gimbal
Connecting cables between the camera and gimbal
Adjusting the balance of the gimbal
Adjusting the gimbal parameters
Configuring the gimbal settings
5-027-737-11(1) Copyright 2021 Sony Group Corporation
LED color LED indication Status of the gimbal
Red Lit up An error has occurred in the motor or IMU
(*1)
.
White Blinking Under calibration
White Lit up Starting the motor or IMU.
Yellow Blinking The motor or IMU is in a standby state.
Green Blinking In the lock mode
(*2)
Green Lit up In the follow mode
(*3)
Blue Blinking The gimbal is starting up, so it cannot accept remote operations.
Purple Blinking Being operated remotely
IMU: Inertial Measurement Unit *1
Lock mode: The camera orientation (shooting direction) will remain the same even if the aircraft turns. *2
Follow mode: The camera orientation (shooting direction) follows the panning (left/right) movement of the aircraft. *3
Roll adjustment 10.
AUX port 11.
USB port 12.
25