Sony AG-R2 Attachment Grip - Manual (Page 39)

Help Guide
Airpeak S1
ARS-S1
Attaching the damping plate to the aircraft
The damping plate (with the quick-release pre-installed), hex wrench, and hex screws are included in the gimbal set
(sold separately).
Attach the damping plate to the aircraft. 1
Perform the operations described in “ Connecting cables to the aircraft .” 1.
Orient the damping plate so that the quick-release arrow ( ) surface faces down and the arrow points toward
the front of the aircraft.
2.
While maintaining the same orientation, place the damping plate on the attachment points of the aircraft. 3.
Use the hex wrench (H2.5 mm) and hex screws included in the gimbal set (sold separately) to attach the
damping plate at two positions on each leg (eight in total). 4.
Insert the plugs at the other ends of the cables connected to the aircraft in the corresponding quick-release
ports.
Control cable (aircraft — gimbal)
Power cable (aircraft — gimbal)
USB Type-C
® cable (aircraft — gimbal)
Front of aircraft
2
39