Precautions – Sony UniSlot Interface Adapter (25-Pin Connector) User Manual

Page 68

UPGRADES/UPDATES OR BY ANY OTHER
LEGALLY RECOGNIZABLE FORM OF
NOTICE. If you do not agree to the
amendment, you should promptly
contact SONY for instructions. Your
continued use of the SOFTWARE after
the effective date of any such notice
shall be deemed your agreement to be
bound by such amendment.

THIRD-PARTY BENEFICIARIES

Each THIRD-PARTY SUPPLIER is an
express intended third-party beneficiary
of, and shall have the right to enforce,
each provision of this EULA with respect
to the SOFTWARE of such party.
Should you have any questions
concerning this EULA, you may contact
SONY by writing to SONY at applicable
contact address of each area or country.

Precautions

On safety

• Should any solid object or liquid fall into

the speaker system, unplug the speaker
system and have it checked by qualified
personnel before operating it any further.

• Do not climb on the speaker system, as

you may fall down and injure yourself, or
speaker system damage may result.

On power sources

• Before operating the speaker system,

check that the operating voltage is
identical to your local power supply. The
operating voltage is indicated on the
nameplate on the bottom of the control
box.

• If you are not going to use the speaker

system for a long time, be sure to
disconnect the speaker system from the
wall outlet (mains). To disconnect the AC
power cord (mains lead), grasp the plug
itself; never pull the cord.

• One blade of the plug is wider than the

other for the purpose of safety and will fit
into the wall outlet (mains) only one way.
If you are unable to insert the plug fully
into the outlet, contact your dealer.

• AC power cord (mains lead) must be

changed only at a qualified service shop.

On heat buildup

Although the speaker system heats up
during operation, this is not a malfunction.
If you continuously use this speaker system
at high volume, the speaker system
temperature at the rear and bottom rises
considerably. To avoid burning yourself, do
not touch the speaker system.

On placement

• Do not place the speaker system near

heat sources or in a place subject to direct
sunlight, excessive dust, or mechanical
shock.

• Do not place anything at the side of the

control box that might block the
ventilation holes and cause malfunctions.