Sony UniSlot Interface Adapter (25-Pin Connector) - Manual (Page 57)

55 US
[HIGH], [TEMP], and [ERROR] appear
alternately for 2 seconds each in the
front panel display, [STANDBY]
appears in the front panel display,
then the speaker system is turned
off.

High-temperature is detected in the
speaker system. Press

(power) to
restart the speaker system.
[BT TX] appears in the front panel
display.

Set [Setup] - [Advanced Settings]
- [Bluetooth Settings] - [Bluetooth
Mode] to [Receiver]. [BT TX] appears
in the front panel display if [Bluetooth
Mode] is set to [Transmitter].
Wireless functions (wireless LAN,
the BLUETOOTH function, speakers,
or optional subwoofer) are
unstable.

Do not place metal objects other than
a TV around the speaker system.
The speaker system restarts.

When connecting to a TV with a
resolution that is different from that of
the speaker system, the speaker
system may restart to reset the
picture output setting.
Resetting the Speaker
System
If the speaker system still does not
operate properly, reset the speaker
system as follows.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] - [Advanced
Settings] on the home menu.
3
Select [Resetting].
4
Select the menu item you want to
reset.
5
Select [Start].
To cancel resetting
Select [Cancel] in step 5.
1
Press and hold

(power) on the
control box for more than 10
seconds.
The settings return to their initial
status.
By resetting, the link with the speakers and
optional subwoofer may be lost. In this
case, reconnect the speakers (page 22) and
optional subwoofer by referring to its
operating instructions.
If You Cannot Perform
Resetting Using the Home
Menu
Note