About the connection of the headphones – Sony UniSlot Interface Adapter (25-Pin Connector) User Manual
Page 33
31
US
To disconnect the paired
headphones
Perform any of the following items.
– Disable the BLUETOOTH function on
the headphones.
– Set
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Bluetooth
Mode] to [Receiver] or [Off].
– Turn off the speaker system or
headphones.
– Select the device name of the
connected headphones from
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Device List].
[Connected] of the device name
disappears.
• You may not be able to adjust the
volume level depending on the
BLUETOOTH compatible headphones.
• Input of BLUETOOTH is disabled when
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Bluetooth
Mode] is set to [Off] or [Transmitter].
• You can register up to 9 BLUETOOTH
devices. If a 10th BLUETOOTH device is
registered, the oldest connected
BLUETOOTH device will be overwritten
by the new one.
• The speaker system can display up to
15 detected BLUETOOTH devices in the
[Device List] (page 30).
• You cannot change the sound effect or
settings while transmitting sound to
the BLUETOOTH compatible
headphones.
• Playback of audio/music on the
BLUETOOTH device is delayed
compared to that on the speaker
system due to the characteristics of
BLUETOOTH wireless technology.
• You can enable or disable the
reception of LDAC audio from the
BLUETOOTH device in [Bluetooth
Settings].
About the Connection of the
Headphones