Listening to sound of the connected, Tv or device using headphones – Sony UniSlot Interface Adapter (25-Pin Connector) User Manual

Page 31

Adjust the volume (page 34).

You can play or pause the content
by using the playback operation
buttons on the remote control.

If sound delay occurs, it may be improved
by setting

[Setup] - [Advanced

Settings] - [Bluetooth Settings] - [Bluetooth
Connection Quality] to [Priority on Stable
Connection].

Tip

When the connection is not established,
select “HT-A9” on the mobile device.

To disconnect the mobile device

Perform any of the following items.
• Disable the BLUETOOTH function on

the mobile device.

• Press the BLUETOOTH button while the

[Bluetooth Audio] screen appears on
the TV screen.

• Set

[Setup] - [Advanced Settings] -

[Bluetooth Settings] - [Bluetooth
Mode] to [Transmitter] or [Off].

• Turn off the speaker system or mobile

device.

Listening to Sound of the
Connected TV or Device
Using Headphones

Set the BLUETOOTH compatible
headphones to pairing mode.

Refer to the operating instructions
of the headphones for the pairing
method.

Press HOME.

The home menu appears on the TV
screen.

Select

[Setup] - [Advanced

Settings] on the home menu.

Select [Bluetooth Settings] -
[Bluetooth Mode] - [Transmitter].

The speaker system enters
BLUETOOTH transmission mode.

Select the name of the
headphones from the [Device List]
in [Bluetooth Settings].

When the BLUETOOTH connection is
established, [Connected] appears.
If you cannot find the name of your
headphones in [Device List], select
[Scan].

Return to the home menu, select

[Watch] or

[Listen], and

select the input.

The image of the selected input
appears on the TV screen, [BT TX]
appears in the front panel display,
then the sound is output from the
headphones.
Sound from the speaker system is
muted at the same time.

Note

Listening to Sound by Pairing
with Headphones