Sony UniSlot Interface Adapter (25-Pin Connector) - Manual (Page 23)

21 US
Performing Initial
Settings
1
Press

(power) on the remote
control supplied with the speaker
system to turn on the speaker
system.
Operate the remote control by
pointing it toward the front of the
control box.
When the speaker system turns on,
[SETUP] appears in the front panel
display.
2
Turn on the TV.
If the [Speaker connection check]
screen does not appear on the TV
screen, change the TV input setting
to the input that the speaker system
is connected.
3
Check that the connection between
the control box and four speakers
is completed on the TV screen.
The control box and speakers are
connected automatically.
The sound for connection
completion is output after the check
marks appear on all the speakers.
The power indicator of the speaker
lights in green when connecting to
the control box.
4
Perform initial settings by
following the on-screen
instructions.
Once [Setup is complete.] appears,
select [Finish].
PLEASE WAIT SETUP

(power)
Speaker connection check
Next
Speaker connection successful.
[ Speaker connection check]
Sound Field Optimization
Later
Language
Select your language.
Easy Network Setup - Start
Optimize the surround sound for your environment.
Connect this unit to the Internet to:
Optimization takes about a minute. A loud sound
may come from your speakers during optimization.
Do not make loud noises, walk or stand in front of
the speakers during optimization.
- Use your mobile device to play streaming music on the unit.
- Install software updates to keep the latest functions available.
You can do this later from [Easy Setup] > [Easy Network Setup].
Start
Next Later
Français (France)
English
Français (Canada)
Español
Deutsch
[ Language]
[ Sound Field Optimization]
[ Easy Network Setup - Start]