Roland Boutique JX-08 Synthesizer Module - Manual (Page 36)

Backing Up Data
36
Backing Up Data
You can save (backup) the tones, patterns and system settings stored on the JX-08 to your computer.
This backup data can then be restored to the JX-08 at a later date.
1. Connect your computer to the JX-08 with a USB cable.
2. While holding down the [MENU] button, turn on the power.
The JX-08 operates in USB mass storage mode. The JX-08 is recognized by your computer as an external storage device. It
takes around 20 seconds for the connection to be recognized.
3. Open the “JX-08” on your computer.
The “BACKUP” folder is shown in the JX-08.
4. Open the “BACKUP” folder.
The backup file appears.
5. Copy (drag and drop) the backup file to your computer.
6. Disconnect the JX-08 from your computer.
If you’re using Windows, click the Safely Remove Hardware icon in the taskbar ( ) and then click “Eject Boutique.”
If you’re using macOS, drag the JX-08 icon to the trash.
7. Turn off the JX-08.