Making sequencer settings – Roland Boutique JX-08 Synthesizer Module User Manual
Page 34
Using the Sequencer
34
Making sequencer settings
With these settings, you can set how the sequencer operates, and access useful functions (utilities) for input.
1.
While in sequencer mode, press the [MENU] button.
The sequencer menu appears.
2.
Use the [VALUE] knob to select the item, and press the [VALUE] knob.
The setting for the item you selected is shown.
3.
Turn the [VALUE] knob to set the value, and press the [VALUE] knob.
This confirms the value you set.
4.
To exit the settings, press the [MENU] button.
Step
buttons
Indication
Value
Explanation
[1]
SHFL
-90
–
90
Sets the timing at which the upbeats (even-numbered steps) play.
[2]
SCAL
8
,
16
,
32
,
4t
,
8t
,
16t
(P.57)”
Specifies the length (scale) of one note for each step.
[3]
S.LEn
1
–
64
Sets the length (number of steps) of the pattern.
[4]
dir
Specifies how the sequencer plays.
FľD
Plays forward from the first step.
REV
Plays backward from the last step.
F_R
Plays forward from the first step, and plays backward after reaching
the last step.
InV
Inverts and plays back the even-numbered and odd-numbered steps.
rnd
Plays steps randomly.
K.trg
The sequence plays back normally while you are playing the
keyboard.
[5]
CC
OFF
,
On
When this is on, the unit outputs the control change messages
(MOTION) recorded in a pattern.
[6]
dUPL
Doubles the number of steps in a pattern and copies the performance
data.
[7]
rnd
Generates random performance data.
[8]
Undo
Reverts the performance data settings to their most recent state just
before being edited.
[9]
rEdo
Restores the performance data settings to the state they were in
before the last undo operation (in other words, this cancels the undo).
[10]
COPY
Copies the performance data.
[11]
PStE
Pastes the performance data you copied.
[12]
C.CLr
Deletes the control change messages (MOTION) from a pattern.
[13]
n.CLr
Deletes the note messages from a pattern.
[14]
A.CLr
Deletes the control change and note messages (MOTION) from a
pattern.
You can also press a corresponding step button to select the parameter items.