Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 55)

55
Other Features
Running the Sequencer
Press the button to make the functions recorded in the sequencer execute one at a time.
1 . Press the [MENU] button 0 “SEQUENCER” 0 select
“SEQUENCER”, and press the [VALUE] knob.
2 . Use the [VALUE] knob to select “ON”, and press the
[VALUE] knob.
The sequencer function turns on.
3 . Press the [MENU] button to close the menu.
The list of operations recorded in the sequencer is shown.
4 . Press the [AUTO] button.
The first function in the list is executed.
The button blinks while the function is executing. When the
function ends, the button remains lit.
5 . Press the [AUTO] button at the timing when you
want the next function to execute.
The function is executed.
[CUT] button
Press the [CUT] button if you want to return to the state at which
the previous function was completed.
6 . Repeat step 5.
7 . To turn the sequencer function off, use the [MENU]
button 0 “SEQUENCER” 0 and set “SEQUENCER”
to “OFF”.
8 . Press the [MENU] button to close the menu.
MEMO
Repeatedly executing a function in the list
You can repeatedly execute functions that are in a list. Once the
last function is finished, press the [AUTO] button to execute the
function at the beginning of the list.
Use the [MENU] button
0 “SEQUENCER” 0 and set “REPEAT
EXECUTE” to “ON”.
Executing a function from the middle of the list
Use the [VALUE] knob to select a function from the list, and
then press the [VALUE] knob to set the selected function to its
completed state. You can press the [AUTO] button to execute the
next function afterwards.
Using the USER buttons
You can assign the function to a USER button and turn sequencer
on/off.
Use the [MENU] button
0 “SYSTEM” 0 “USER SW 1” or “UESR
SW 2” 0 use the following menu items to change the function
assignment.
Menu item Explanation
CATEGORY Choose “SEQUENCER”.
VALUE Choose “MODE ON/OFF”.