Roland GK-3 - Slimline Divided Electric Guitar Pickup for use with Roland and other 13-pin Guitar Effects Processors - Manual (Page 5)

5
Panel Descriptions
fig.0010
1. Divided Pickup
This pickup detects the vibrations of the
guitar strings. It is attached between the
guitar bridge and the bridge pickup.
2. GK Volume
This controls the volume of the connected
GK-compatible device.
* Certain GK-compatible devices also permit the GK
Volume function to be changed. For more detailed
information, refer to the Owner’s Manual for the
GK-compatible device being connected.
3. GK Connector
Connect the GK-compatible device to this
connector.
4. Normal Pickup Input Jack
This jack is for inputting the guitar’s normal
pickup signals to the GK-3. Connect using
the normal guitar cable included with the
GK-3.
5. Select Switch
This switches between the output from the
connected GK-compatible device and the
normal guitar output.
* Changing the GK Volume function also changes the
function of this switch. For more detailed
information, refer to the Owner’s Manual for the
GK-compatible device being connected.
6. DOWN/S1 Switch
7. UP/S2 Switch
The function of the S1 and S2 switches varies
according to the GK-compatible device
connected. For more detailed information,
refer to the Owner’s Manual for the GK-
compatible device being connected.
8. Power Indicator
This indicates that power is being supplied
to the GK-3. Power to the GK-3 is supplied
by the connected GK-compatible device via
the GK cable. No battery or other power
source is required.
GK Connector 3. Select Switch 5.
7. UP/S2 Switch
6. DOWN/S1 Switch
1. Divided Pickup
2. GK Volume
4. Normal Pickup Input Jack
8. Power Indicator R Adjustment Screw
Yoke
Controller Pickup
Pickup Cable
GK-3_e.book 5 ページ ２０２１年７月１５日 木曜日 午後４時５６分