Roland GK-3 - Slimline Divided Electric Guitar Pickup for use with Roland and other 13-pin Guitar Effects Processors - Manual (Page 14)

14
Attaching the GK-3 to the Guitar
Checking and Finely Adjusting the Pickup Height
Use the clearance gauge to confirm that the clearance between each string and the pickup is
about 1 mm. If the gap is greater than 1 mm (0.04”), make fine adjustments to the height of the
pickup itself and to the pickup curve (refer to p. 8).
GK-3_e.book 14 ページ ２０２１年７月１５日 木曜日 午後４時５６分