Using a twin (double kick) pedal – Roland KD-140 V-Kick Trigger Pad (Black Chrome) User Manual

Page 6

Mounting the kick pedal.

If the hoop and kick pedal touch each other, re-mount

the pedal by positioning it more towards yourself.

Adjust the length of the rod.

After mounting kick pedal, adjust the length of the rod so that

the entire bottom of the kick pedal is in contact with the floor.

❍

Correct position

fig.13-e.eps

• Rod is too long

fig.14-e.eps

• Rod is too short

fig.15-e.eps

Adjust the striking point for the beater.

Adjust the length of the beater so that strikes near or on the

center of the head.

Make sure it does not extend beyond the cushion on the

back of the head.

fig.17-e.eps_90

Using a twin (double kick) pedal

The KD-140 can also be used with a twin (double kick) pedal.

Adjust the striking points of the two beaters so that they are

at equal distances to the left and right of the center of the

head.

fig.18-1.eps_90

When using a regular pedal or a twin pedal, please use

plastic beaters.

Entire bottom of the kick pedal contacts the floor

Rod

Bottom of the kick pedal is floating

Cushion

Sensor

KD-140_e.book 6 ページ２０２１年７月１５日　木曜日　午後６時５分