Roland PD-108 V-Pad 10" (Black Chrome) - Manual (Page 5)

5
Mounting the Pads
Mounting the PD-128S
(Dedicated Snare Pad)
The PD-128S (dedicated snare pad) has no mounting
bracket so can only be used with a snare stand.
Make sure that the snare stand you are using is able to
support a 12-inch shell.
MEMO
Since the PD-128S is a dedicated snare pad, it does
not have a bracket.
Mounting the PD-128 or 108
on a Tom Stand
The PD-128/108 can be attached to a stand that has
either a vertical rod or a horizontal pipe.
Stand with Vertical Rod
(MDS Series)
Loosen
Tighten
Rod diameter that can be attached: 9–11.5 mm (3/8–1/2 inch)
Stand with Horizontal Pipe
Loosen
Tighten
Usable pipe size: 22.2 mm (7/8 inch)
Mounting the PD-128 or 108
on a Snare Stand
It was already mentioned that mounting a PD-128S
requires a snare stand that can support a 12-inch shell.
For the PD-108, the stand must support a 10-inch shell.
MEMO
Tighten the knob that fastens bracket securely to
assure the best functionality.