Roland DJ-202 2-Channel, 4-Deck DJ Controller for Serato DJ Lite User Manual
Page 6
6
Panel Descriptions
Deck section
1
2
3
4
5
6
7
8
9
10
11
12
13
7
Pad Mode select
[SAMPLER] button
Press [SAMPLER]
Button: Lit
Assigns sampler to performance pads 1–8.
[SHIFT] + [SAMPLER]
Button: Blinking slowly
Selects slicer mode.
Press [SAMPLER] twice
Button: Blinking quickly
Selects slicer loop mode.
Press [SHIFT] + [SAMPLER] twice
Button: Blinking at high speed
Sampler is assigned to performance pads 1–4, and manual
loop is assigned to 5–8.
8
Performance pads
Use these pads to perform in the pad mode that you’ve selected.
9
PARAM area
Here you can specify the value of the parameter that’s operated by the
performance pads.
10
[KEY LOCK] button
Turns the key lock function on/off.
* If the key lock function is on, the pitch does not change even if you use
the tempo slider to change the playback speed.
[SHIFT] + [KEY LOCK]
Specifies the variable range of the Tempo slider.
The setting changes in the order of ±8%
0
16%
0
50%.
11
[DECK 3], [DECK 4] buttons
Switch the deck (left: decks 1 and 3, right: decks 2 and 4) to be operated.
12
Tempo slider
Adjusts the playback speed of the song.
If the key lock function is on:
Changes the playback speed.
“–” side
Lowers the playback speed.
“+” side
Raises the playback speed.
If the key lock function is off:
Changes the playback speed and pitch.
“–” side
Lowers the playback speed and pitch.
“+” side
Raises the playback speed and pitch.
13
FX 1, FX 2 area
Here you can adjust the effects (FX 1: deck 1, FX 2: deck 2).
[LEVEL] knob
Adjust the character of the effect.
[SHIFT] + [LEVEL] knob
Adjusts the time for which the effect is applied.
Effect buttons [1]–[3]
Turn the effect on/off.
[SHIFT] + Effect button
Changes the effect type.
[TAP] button
The interval at which you press this button (tap tempo) specifies the
reference tempo of the effect.
If you long-press the button, the specified tempo is reset.
[SHIFT] + [TAP]
Switches the effect mode (single FX/multi FX).