Roland DJ-202 2-Channel, 4-Deck DJ Controller for Serato DJ Lite - Manual (Page 10)

10
Using Serato DJ Intro
Playing a Song
1 Set the DJ-202’s knobs and switches as follows.
[MASTER LEVEL] knob Turned all the way to the left
[TRIM] knobs
Center [HI], [MID], [LOW] knobs
[FILTER] knobs
Channel faders
Lowest position
2 Press the [ r ] button to play back the loaded song.
3 Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level indicator is lit as far as the
orange portion.
4 Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.
Monitoring Through Headphones
1 Set the DJ-202’s knobs as follows.
[MIXING] knob
Turned all the way to the left
[PHONES LEVEL] knob
2 Press the channel [CUE] button of the channel that you want to
monitor.
3 Turn the [PHONES LEVEL] knob toward the right to adjust the
headphone level.
Closing Serato DJ Intro
1 Close the Serato DJ Intro screen.
Mac OS
In the upper left of the Serato DJ Intro screen, click the [ 6 ] (red: close)
button.
Windows
In the upper right of the Serato DJ Intro screen, click the [X] button.
A confirmation screen appears.
2 Click [Yes] to close Serato DJ Intro.
3 Turn off the power of the equipment that’s connected to the
DJ-202.
4 Disconnect the USB cable to power-off the DJ-202.