Troubleshooting – Roland VC-1-SH SDI to HDMI Video Converter User Manual
Page 27
27
Appendices
Troubleshooting
After a period of no operation, the unit turned itself off.
Is the AUTO OFF feature activated? By default, the AUTO OFF feature is set to ON.
When the unit is to be left powered up for a long time, set mode switch 10 to [OFF]
to turn off the AUTO OFF feature.
Input/output of AES audio is not possible.
Is the connection to the source device or the output device made via the L channel?
When the mode switches have been set to enable AES input/output, only the
R-channel jacks are active, and the L-channel ports are disabled.
Settings cannot be changed using the mode switches.
Is mode switch 10 at the [ON] position? When making setting changes, be sure to
set switch 10 to [OFF].
The volume level of equipment connected to the AUDIO IN jacks is low.
Are you using connection cables that contain resistors? Use connector cables that
do not contain resistors.