Roland VC-1-SH SDI to HDMI Video Converter - Manual (Page 12)

12
About the Power Supply
About Securing the Power Cord
You can use either of the two methods described below to secure the power cord in
place. Doing this can prevent inadvertent disruption of power to your unit (should
the plug be pulled out accidentally) and avoid applying undue stress to the DC IN
connector.
Securing Using the Cord Hook
You can secure the cord in place as shown below.
fig.cord-hook.eps
Securing Using the Holes in the Top/Bottom Panel
You can secure the cord using the holes in the top or bottom panel, as shown below.
fig.top-panel-holes.eps