Roland VC-1-SH SDI to HDMI Video Converter - Manual (Page 21)

21
Connecting External Equipment
Connecting Audio Output Equipment
Connecting Analog Output Equipment
Connect bi-amp speakers or the like to the AUDIO OUT connectors.
fig.AUDIO-OUT-connection.eps
Connecting Digital Output Equipment
Change the setting (p.) to output AES signals. When you are doing this, use only the
R-channel of AUDIO OUT connectors. The L-channel is invalid when the setting is
changed to output AES signals.
fig.AES-out-connection.eps
Connecting a Computer for Remote Control
Connect a computer for remote control to the USB port.
fig.PC-connection.eps
Operating the VC-1-SH by remote control requires downloading dedicated software
(VC-1 RCS) and installing it on a computer. You can download the dedicated
software from the following Roland website.
http://www.rolandsystemsgroup.net/
The VC-1 RCS enables you to make detailed settings that cannot be made using the unit’s
mode switches. The values of the settings are saved to the unit’s internal memory. You can use
such saved settings even when you are using the unit alone, without connecting a computer.