Connecting output equipment, Connecting video output equipment, Connecting audio output equipment – Roland V-1200HD Multi-Format Video Switcher User Manual

Page 25: Connecting output equipment 25, P. 25, Making hdmi connections, Making sdi connections, Making an analog connection, Making a digital connection, Connecting external equipment

Connecting External Equipment

Connecting Video Output Equipment

Making HDMI Connections

Connect television monitors and other equipment provided with

HDMI input to the respective HDMI OUT connectors.

MULTI-VIEW 1

Video selected from among the following is displayed on up

to a 16-way split screen. (*1)

SDI IN 1–10

HDMI IN 1, 2

EXP IN 1, 2 (input video from an optional expansion

interface)

SDI OUT1–6

STILL1, 2 (still images imported from a USB flash drive)

* Connect a monitor that supports 1080/60p HDMI input.

MULTI-VIEW 2

Here you connect a monitor for displaying input/output lists

and menu screens.
The selected video is displayed on a four-way split screen. (*1)
* Connect an HDCP-compatible monitor.
* Connect a monitor that supports 1080/60p HDMI input.

HDMI OUT 1, 2

These output video from the V-1200HD’s 4:4:4 process. The

output video is output in the specified 4:4:4 processing

format.
For information on 4:4:4 formats, refer to “4:4:4 Process” (p. 20).

(*1 )For details about the multi-view screen, refer to the “V-1200HDR/V-1200HD RCS

Remote Control Guide” (PDF) available for download from the Roland website.

http://proav.roland.com

Making SDI Connections

Connect monitors, video decks (for recording), and other devices

equipped with SDI inputs to the SDI OUT connectors. Video is

output in the specified 4:2:2 processing format.

For information on 4:2:2 formats, refer to “4:2:2 Process” (p. 19).

Connecting Audio Output Equipment

Making an Analog Connection

Connect the analog inputs of amplifiers, powered speakers, and

recording equipment to the AUDIO OUT connectors.

Set the audio selector switch to [ANALOG].

* The nominal output level of the V-1200HD is +4 dBu. Connect

equipment that accommodates this nominal output level.

NOTE

The audio selector switch affects both input and output. For

details, refer to “About the Audio Selector Switch” (p. 22).

Making a Digital Connection

Connect audio output equipment that has digital (AES/EBU) input

to the AUDIO OUT connectors.

* Use an AES/EBU-compliant cable.

The V-1200HD supports the AES3 standard (24 bits, 48 kHz, two

channels).

Set the audio selector switch to [AES/EBU].

NOTE

The audio selector switch affects both input and output. For

details, refer to “About the Audio Selector Switch” (p. 22).

Connecting Output Equipment