Rear panel, Rear panel 17, Part names and functions – Roland V-1200HD Multi-Format Video Switcher User Manual

Page 17

Part Names and Functions

Rear Panel

Number Name

Description

Page

TALLY/GPIO connector

Connect devices provided with a tally-light feature and devices equipped with control-signal input/output functions

here.

p. 28

SDI IN connectors

These are connectors for inputting SDI signals. Use them with source devices equipped with SDI output connectors,

such as 3G-SDI, HD-SDI, and SD-SDI devices.

p. 23

SDI OUT connectors

These are connectors for outputting SDI signals. Use them with video devices equipped with SDI input connectors.

p. 25

HDMI IN 1, 2 connectors

These are connectors for inputting HDMI signals. Use them with video cameras and other source devices equipped

with HDMI output connectors. Input video formats that are compatible with the specified processing formats.
* Copyright-protected (HDCP) video cannot be input.

p. 23

HDMI OUT MULTI-VIEW 1

connector

Here you connect an HDMI monitor for multi-view display of the input/output list.
Video selected from among the following is displayed on up to a 16-way split screen. (*1)

SDI IN 1–10

HDMI IN 1, 2

EXP IN 1, 2 (input video from an optional expansion interface)

SDI OUT1–6

STIILL1, 2 (still images imported from a USB flash drive)

EXP OUT 1, 2 (output video sent to optional expansion interfaces)

* Connect a monitor that supports 1080/60p HDMI input.

p. 25

Power Cord Hook

You can use this power cord hook to prevent the power cord from being accidentally disconnected.

p. 12

USB port

This is a USB connector for future feature expansion.
* This port is not active in the initial release of the V-1200HD.

—

LAN port

Use this port to connect an optional V-1200HDR dedicated controller, or a computer on which the V-1200HD RCS

remote-control software is installed.

p. 27

Audio selector switch

This switches the input/output mode of the AUDIO IN and AUDIO OUT connectors.

p. 22

AUDIO OUT connectors

These are connectors for outputting audio signals. Connect them to recording equipment, amplifiers, powered

speakers, and other devices that receive audio.

p. 25

AUDIO IN connectors

These are connectors for inputting audio signals. Use them with CD players and other audio source devices.

p. 24

REFERENCE IN connector
OUT/THRU connector

These are connectors for input and output of sync signals.

p. 24

HDMI OUT MULTI-VIEW 2

connector

Here you can connect a monitor to display input/output lists and menu screens.
The selected video is displayed on a four-way split screen. (*1)
* Connect a monitor that supports copyright protection (HDCP).
* Connect a monitor that supports 1080/60p HDMI input.

p. 25
p. 26